One perk of having your security system hooked up by trained experts is that you rarely find a reason to make major adjustments to it. Even so, there could be a few instances when you must reset your alarms in Cedar Rapids. If you’re utilizing a smart command interface, your system reset typically needs only one or two tap of a button after occurrences like battery changes, power outages, and false alarms.
Check Your Instruction Manual Before Trying to Reset Your Alarm Panel
One note of caution before you try to reset your Cedar Rapids home security system, consult your manual first. You wouldn’t want to undermine your system due to pressing the wrong button. In addition, control panels could have changed if you switched from a numerical keypad to a digital command hub. If there’s ever a time when you’re unable to figure out how to reset your system, don't worry as you can always call the professionals.
Resetting Your Cedar Rapids Home Security System Because Of A False Alarm
Usually, a false alarm happens due to a sensor that was tripped by accident. You can engage the control panel or open your ADT smartphone app and touch the shield option and type in your unique passcode to turn off the alarms in these situations. You might get a call from your 24-hour monitoring specialists, but just let them know you had a false alarm.
Resetting Your Alarm Following A Power Outage In Cedar Rapids
If power is lost because of high winds or other factors, you might start hearing a repeated, high-pitched beep from your central command hub. That indicates that the alarm is using the secondary power source. To reset the alarm and stop the beeping, you must take steps to disarm and rearm your security.
Keep in mind, if you lose power for an extended time, you could need a full reset of your home’s security. Follow the instructions in your user’s handbook -- usually by putting in your PIN number and pressing the designated button two times -- and you should be back in business. You could keep hearing chirps from the backup power, as it’s possible it won’t stop until the battery charges entirely. Reach out to your security technician if you are still having problems with your ADT controls a day after the power is resumed.
When You Need To Reset Your Home Security System After Switching Out A Battery
On occasion you must replace a battery within one of the devices in your security installation. In order to accomplish this, you will change your alarm system to Test Mode so you avoid triggering an accidental alarm. After the new battery is put in place, move the alarm from test mode and restore normal operations. If the system fails to recognize the component or the battery indicator remains on, you may need a whole system reset.
Reset Your Cedar Rapids Security System When Adding Or Removing A Code
Removing or adding personal codes can be completed on your ADT Command interface and your ADT smartphone app. You should never have to perform a reset of your alarm following the addition or deletion of a user or code. With that being said, if you find yourself moving to a new property already equipped with an ADT security system, you'll want to contact your residential security experts at (319) 214-2293 to start a new service. The technician will visit your property to switch out components, place more alarms or cameras (if needed), and reset the system for you.
A User-Friendly Security System Is The Right Choice
Figuring out how to reset a home security system in Cedar Rapids can be frustrating if it fails to include user-friendly equipment and instructions. If the time has come to get your easy-to-use home protection system, dial (319) 214-2293 or complete the form below. Our specialists are happy to design the right security system for your residence.